800 pcs 6mm 3D Tracking Dots Reference Point Markers for 3D Scanning,Diffuse Reflection Markers for 3D Scanner

Price: $21.99
(as of May 28, 2024 02:33:33 UTC – Details)

Product Description

What is a 3D marker (3D target)?

3D Scanning marker is a small sticker or magnet with an image of a black or white dots printing on it. A 3D scanner uses these “high-contrast”objects to determine its location. Markers are usually applied on (or near) the object being scanned, to increase accuracy and repeatability of 3D data.

these 3d target is compatible with the brands ARTEC 3 d scanner, Creaform, Creality, Revopint, Shining 3d Einstar Handheld 3 d scanner, Shining 3 d, 3 dmakerpro etc,

3D Scanning Markers, Why are they important ?

Markers reduce the possibility of losing tracking during scanning.in another word to say,By using markers, you do not lose tracking during scanning,so the process is faster and predictable.They also ensure high accuracy and repeatability of results,besides other 3d scanner turntable and 3d scanning spray is basic necessory during your 3d shining scanning .

What else should I know about markers?

Here are a few tips for scanning with your scanners and markers. whatever your laser scanner in industrial scanning or infrared white scanner in consumer 3D scanning.

At any given time during scanning, the scanner needs to see minimum 3 markers in every frame. When it doesn’t, scanning will automatically stop. Although 3 markers per frame is the minimum, the optimal number is 5. That is because in certain circumstances, even if the marker is visible to the camera, the software doesn’t recognize it as such. When affixing markers, apply them on flat areas of the object and not on sharp edges of the object. Also, that the scanner might sometimes not see a marker when looking at it from an awkward angle.

Why do we need 3D Scanner marker points (3d target)?

Markers are needed for accurate and easy 3D scanning. They actually solve two separate issues: difficulty during scanning and difficulty attaining high accuracy on large object

Without markers, the scanner will lose its alignment during scanning and the software will not know how Frame1 is supposed to be aligned to Frame2, Frame2 to Frame3 and so on… The software will try to align all frames using the objects’ unique geometry. However, this guesswork doesn’t always produce great results and in many cases, especially on objects with large flat surfaces and no unique geometry, even the most sophisticated algorithm will fail, compatible with stud finder wall scanner.

When to use (3d taret)3D Scanning markers?

You would need markers to scan a flat surface with little or no geometry, and black color objects.

When not to use 3D Scannr markers?

You don’t need markers if you are scanning an object with lots of geometry like humans or statues.

How to use 3D markers (3d target)when scanning small item?

For smaller items,you can place markers around the object,instead of on the object.

Why does these reflective Dot Sticker make scanning easier?

By using markers, you do not lose tracking during scanning,so the process is faster and predictable

How to select what size is the best to fit your for 3D scanning ?

The size of the tracking stickers for 3d scanner depends on which 3D scanner and measuring volume is used for measuring your objects,Basically to say: the larger the item, the bigger the points have to be applied.

Reflective stickers 3D markers for 3D Scanning Specification:

Inner diameter: 6.0 mm

Outer diameter: 10.0 mm

Round, on adhesive foil as tear-off pad

50 single point marker each sheet,total 16 sheet

How Far apart should they be placed？

Depending on what accuracy you request, markers should be placed randomly approximately 5cm apart for Minimum 10cm for Medium and 15cm for Maximum.

3 pcs markers in each frame is the absolute minimum, but 5 pcs markers are recommended to ensure smooth operations.

What you will get to compatible with your einstar 3d scanner?

1 pack 16 sheet, Total 800 pcs Reference Points,Tracking Dots 6 mm for your 3D scanning.

Package Dimensions ‏ : ‎ 5.31 x 4.33 x 0.2 inches; 1.13 ounces
Date First Available ‏ : ‎ March 20, 2024
Manufacturer ‏ : ‎ Gangming
ASIN ‏ : ‎ B0CYLSYJF5

Inner diameter: 6.0 mm,outer diameter: 10.0 mm, 50pieces 3D Scanning markers each sheet
Round,on adhesive foil as tear-off pad,easy to use.
Compatible with kinds of handheld and desktop 3D scanners such as Creaform Artec 3D EinScan Shining 3D Creatliy Revopoint etc.
Attaching 3d markers to the object and giving the software a “constant feature” to track ensures the highest accuracy.
Widely used in industries such as automotive, aerospace, mechanical, manufacturing, power generation, electronics, and education.